| Column 1: |
“-” = Standard Tool Style
HP = High Pressure Tool Style – New design to optimize high pressure coolant by placing coolant exit holes directly in the front of the inserts. |
| Column 2: |
Minimum Size Thread with Standard Pitch Inserts
78 = 0.875"
01 = 1.0"
125 = 1.250"
138 = 1.375"
15 = 1.5"
175 = 1.75"
20 = 2.0"
25 = 2.5"
30 = 3.0"
35 = 3.5"
40 = 4.0"
50 = 5.0"
60 = 6.0" |
| Column 3: |
TA - Weldon Shank Replaceable Insert Thread Mill |
| Column 4: |
Tool Weldon Shank Size
05 = Shank Ø0.500"
34 = Shank Ø0.750"
78 = Shank Ø0.875"
01 = Shank Ø1.000"
125 = Shank Ø1.250"
150 = Shank Ø1.500"
200 = Shank Ø2.000" |
| Column5: |
Number of Flutes
F2 = 2 Flutes Tool
F3 = 3 Flutes Tool
F4 = 4 Flutes Tool
F5 = 5 Flutes Tool
F6 = 6 Flutes Tool
F8 = 8 Flutes Tool
F10 = 10 Flutes Tool
F12 = 12 Flutes Tool
F14 = 14 Flutes Tool
F16 = 16 Flutes Tool
F20 = 20 Flutes Tool
F24 = 24 Flutes Tool |
| Column 6: |
Tool Length Weldon Shank Tools: Over All Length
9 = 9"
OAL - Extended Length Tool Only. End Mill Holders Are Recommended. |
